DHCP assigment with packet tracer, need help completing the assignment.  Introduction to Routing and Switching Week 2 Guided Practice:

DHCP assigment with packet tracer, need help completing the assignment. 

Introduction to Routing and Switching Week 2 Guided Practice: DHCP

Objective

In this Guided Practice you will be connecting and configuring a small subnetted network with multiple routers.

Technology

You will use Packet Tracer in this practice. Anytime you see a 50 in an IP address replace with your assigned number.

Task 1 – Configuring DHCP

You will start with the network you previously connected and configured in the VLSM Guided Practice. Notice the labeling of the VLANs and network addresses below. Make sure to make similar labels to your network before moving to the next step.

In week 1 you configured DCHP pools on a router. A more common way to configure DCHP on a network is to have DCHP pools configured on a server. Follow the steps below to configure DHCP pools on Server1 of your network. Your PCs and Wi-Fi Router will use DCHP and the servers will both have static IP addresses.

Reference the previous Guided Practice for any IP addressing information that you may need.

Assign Server1 and Server2 static IP addresses. As a reminder, use your assigned number for the third octet where 50 is used for instructional purposes.

Double click on Server1 and under Services at the top click DHCP on the left.

You will now begin to add the DHCP pools for your PCs and the Wi-Fi Router . Under Interface at the top click On for Service.

Start by adding the first DCHP pool that PC1 will use. Once you fill in the information click on Add at the bottom. You will then see the PC1 DCHP pool at the bottom of the screen.

Continue creating the other four DCHP pools using the same steps as above. Take a screenshot.

Next we need to tell the R1 and R3 routers where these DCHP pools are located. Console into the R3 router. We will add the ip helper command to our four sub-interfaces. This will tell the router where to go to for a DHCP request.

Verify your PCs all receive IP addresses via DCHP. Take a screenshot of each.

Deliverables for Task 1

· Screenshot of your DCHP pools on Server1.

· Screenshot of your PCs with IP addresses via DHCP.


Task 2 – Configuring SSH and Telnet


You will now set up SSH and Telnet communications on your routers. This is the typical way network administrators set up their systems so they can communicate to each router from a central location. Otherwise you will need to physically travel to each router with your laptop and a console cable.

You will set up SSH for communications across the network. You will need to do the following for the R1, R2 and R3 routers on your network. Below is an example for the R1 router.

1. Create a secret password on the R1 router.

2. Create a domain and logon username.

3. Now we are going to create the crypto key for the SSH session.

4. Now enable SSH version 2, set time out duration and login attempt time on the router.

5. Enable VTY lines and configure access protocols.



Testing Connectivity

Ping from PC2 to the R2 router. Take a screenshot.

Let’s now SSH from PC2 to the R2 router from the same command prompt. You will use class for the first password and hit enter. Then type enable and enter then cisco for the second password. You will now enter the R2 router. Take a screenshot. Go ahead and SSH to the R1 and R3 routers as well and take screenshots like the one below for the R1 router.

Next we will Telnet from PC4 to the R1 router. The sequence is similar to SSH, see example below. Open a command prompt and type telnet 192.168.___.241. Your username and passwords are the same as you used for SSH. Take a screenshot. Go ahead and Telnet to the R2 and R3 routers as well and take screenshots like the one below for the R1 router.


What are some differences between SSH and Telnet? Why should you use SSH and not Telnet?


Deliverables for Task 2

· Screenshot of ping from PC2 to the R2 router.

· Screenshot of SSH and Telnet to each router on the network.

· Answer the questions about Telnet vs SSH: What are some differences between SSH and Telnet? Why should you use SSH and not Telnet

Task 3 – DNS

In this task you will be using DNS that is configured on the Internet Server where there are three DNS a records configured.

What is a DNS A record? The “A” stands for “address” and this is the most fundamental type of DNS record: 
it indicates the IP address of a given domain. For example, if you pull the DNS records of cloudflare.com, the A record currently returns an IP address of: 104.17. 210.9. A records only hold IPv4 addresses.

Double click on the Internet server and under Services at the top click on DNS.

You will see three different A records- we will use server.com.

Go to PC4 and open a command prompt. Ping 11.1.1.10 and then server.com. Take screenshots. Finally bring up a Web Browser and put server.com in the URL box. Take a screenshot.


Deliverables for Task 3

· Screenshot of ping from PC4 to 11.1.1.10

· Screenshot of ping from PC4 to server.com

· Screenshot of Web Browser using server.com

image3.png

image4.png

image5.png

image6.png

image7.png

image8.png

image9.png

image10.png

image11.png

image12.png

image13.png

image14.png

image15.png

image16.png

image17.png

image18.png

image19.png

image20.png

image21.png

image22.png

image23.png

image24.png

image25.png

image1.png

image2.png

Share This Post

Email
WhatsApp
Facebook
Twitter
LinkedIn
Pinterest
Reddit

Order a Similar Paper and get 15% Discount on your First Order

Related Questions

 This week, explore the relationship between strategic goals and alignment with projects and best practices from the five process groups, especially

 This week, explore the relationship between strategic goals and alignment with projects and best practices from the five process groups, especially focusing on executing, monitoring, and controlling projects. This assessment is the first component of your course project.   In this assessment, you will write a topic definition statement for your

  For this discussion, compare and contrast the characteristics of quantitative and qualitative research, addressing the philosophical assumptions of

  For this discussion, compare and contrast the characteristics of quantitative and qualitative research, addressing the philosophical assumptions of both. Based on your review of the assigned readings, identify and describe what you believe to be meaningful about the qualitative research design and methodology. Define and describe the context in

  this week, explore scholarly literature on critical success factors and project management success. Specifically, focus on complex projects and their

  this week, explore scholarly literature on critical success factors and project management success. Specifically, focus on complex projects and their success or failures, which may include tools, templates, processes, procedures, and metrics, and their relationship to the five process groups: initiating, planning, executing, monitoring and controlling, and closing. Post

IT 226 Project Two Guidelines and Rubric Competency In this project, you will demonstrate your mastery of the following competencies: ·

IT 226 Project Two Guidelines and Rubric Competency In this project, you will demonstrate your mastery of the following competencies: · Determine appropriate ways to communicate information to internal and external stakeholders · Apply communication techniques to effectively negotiate and manage conflict Scenario You are the manager of a team of 10 software developers working on a new application for your company, Optimum Way Development, which is based out of Raleigh, North Carolina. Your organization recently acquired a smaller software company based in San Jose, California. You have been informed that your team will be bringing on five people from this newly acquired company; all five people will be moving to Raleigh to join your team. You schedule a phone call with the five new team members and discover that they are upset about the recent impersonal message they received from human resources informing them that they would have to relocate to Raleigh in order to stay employed; no one expressed excitement about joining the team. During this conversation, you also discover that many of the new team members have more education and experience than the people currently on your team. Based on the conversation, you notice that most of these team members are likely older than you, whereas all of the current Raleigh team members are younger than you. After the call, one of your current senior team members approaches you about rumors that are circulating concerning the Raleigh team being required to train the new team members from San Jose. They heard that there are plans to eliminate positions and are concerned the new hires will ultimately be taking their positions. The director who oversees your division has requested that you create and present a recommendation report that documents your plans for managing the conflicts that currently exist or may arise on your team. The director has an advanced degree in a computer science-related field and has worked in technology for over a decade. Directions In order to identify and resolve existing and future conflicts, you have been asked to compose and present your plan for managing conflict for this project. In addition to identifying and resolving the conflicts, you are also responsible for keeping the development of the new application moving forward by continuing to meet scheduled milestones. To do this, you will create a recommendation report and corresponding presentation. The audience for both deliverables is your director. As you create your report and presentation, remember to  use communication techniques and platforms that are appropriate for your audience’s preferences and motivations. Both deliverables should be based on the above scenario and include the following: 1. To start,  explain the major elements of the software application, including background, audience, functions, and features. 2. Next,  explain the areas of conflict for the team. Make sure to include contributing factors and the possible impacts. 3. Articulate the desired outcome of any conflict resolution activities. · How would you like to see this conflict resolved? · What is the “best-case” scenario? 4. Recommend action steps for managing areas of possible conflict with a detailed explanation on how the action steps contribute to conflict resolution. 5. In the presentation only,  use dialogue to communicate the appropriate main ideas to the audience. Although you will not give this presentation over video, you should use the speaker’s notes section in PowerPoint to write the accompanying speech. What to Submit To complete this project, you must submit the following: Recommendation Report Your report should be at least 2 full pages in length (not including a title page), single-spaced and submitted as either a Word document or PDF. Outside resources are not required, but any resources used must be appropriately cited using APA style. You may use the  Recommendation Report Template Word Document for this submission. Presentation Your presentation should be in a presentation format (such as PowerPoint) and  provide an overview of the main ideas from the recommendation report. Using the speaker’s notes section of PowerPoint, include the speech that would accompany the presentation. Outside resources are not required, but any resources used must be appropriately cited using APA style. Supporting Materials The following resource(s) may help support your work on the project: Resource:  Software Design Documents Use one of these software design documents to summarize the application in your report and presentation. Shapiro Library Resource:  Shapiro Library APA Style Guide This Shapiro Library guide goes over the basics of APA-style formatting and citations.

STUDENT COVER SHEET- Student and Trainer/Trainer Details

STUDENT COVER SHEET- Student and Trainer/Trainer Details Student ID Student name Contact number Email address Trainer name Jason Chu Course and Unit Details Course code ICT50118/ICT60115 Course name Diploma/Advanced Diploma of IT Unit code ICTICT608 Unit name Interact with a client on a business level Assessment Title Assessment 1 –